SERVICE HOTLINE:86-513-81188826

YJ-M4080

Parameters Unit YJ-M4080
Working Table of Working Area Working Surface of Table mm 400 × 800 (16 "× 32")
Left and right maximum travel Max. Table Travel mm 920
Max Travel Before and After Max. Cross Travel mm 450
Distance between table and spindle center mm 580
Max. Table Load kgs 700
T-slot T-slot (Number × Width) mm 3 × 14
Table Speed Table Speed m / min 5 ~ 25
Front and rear handwheel 1 knife Crossfeed Handwheel 1 grad mm 0.02
1 lap 1 rev 5
Automatic Crossfeed of Saddle mm 0.5 ~ 12
Quick feed 50Hz Power Cross Feed 50Hz mm 790 front and rear
60Hz 60Hz 950
Grinding Wheel Dimensions mm 355 × 40 × 127
Spindle Speed 50Hz Spindle Speed 50Hz rpm 1450
60Hz 60Hz 1740
Up and down hand wheel knife 1 square Vertical Handwheel 1 grad mm 0.01 / 0.01 / 0.001
1 turn 1 rev 2/2 / 0.5
Automatic Down Feed Rate mm - / - / 0.005 ~ 0.025
Power Head Increment mm - / 380/230
Spindle Motor kw 5.5
Vertical Motor w / / 90/90
Hydraulic Motor kw 2.2
Dust Collection Motor w 550
Coolant Motor w 90
Front and rear drive motors Crossfeed Motor w 90
Floor Space mm 3600 × 2600
Packing Dimensions mm 2720 × 2155 × 2195
Net Weight kgs 2800/2810/2850
Gross Weight kgs 3100/3110/3150

Note: 1, this information is for reference only, the manufacturer reserves the right to change the size and design specifications. 2, some pictures in the machine special configuration, to be matching.
Copyright © 2019   Nantong YIJI Machinery Co., Ltd. all rights reserved